TEA SKIFFING AND PRUNING MACHINE

FINE Tea Pruner Model NCK43
Tea Skiffing and Pruning machine




THE MOST EFFICIENT PRUNING EQUIPMENT
Fine Tea Pruner NCK43 is purely designed for Tea Skiffing and Pruning Tea Bushes.It will
make your pruning job a lot easier and efficient so that you can finish the laborious pruning
works in the limited time schedule.  This pruner let your workers free from hard manual
pruning jobs.

SIMPLE & LIGHT WEIGHT PRUNER
Since the mechanism is basically the same as bush cutter, anyone can operate the pruner
easily without having any special training.

VIBRATION GREATLY REDUCED
To operate the pruner comfortably, it is needed to reduce the vibration degree as much as
possible.  Under this point of view, FINE Tea Pruner Model NCK43 was designed and has
succeeded to reduce the vibration degree so much by mean of effective vibration absorbing
mechanism. 

FLAT & HORIZONTAL PRUNING
The angle of circular blade is almost parallel to the shaft, so you can skiff the tea bushes
horizontally and make flat surface of the tea bushes.

SHARP CUTTING & ITS SHARPNESS LAST LONG
The pruner mounts with 100 Teeth Tungsten Carbide Tipped Saw Blade.  This blade makes it
possible to carry out the clean cut of both skiffing for slender branches and heavy pruning for
thicker branches.  Since the Tungsten Carbide is very hard metal, so its sharpeness lasts
longer.

SPECIFICATION

 Engine  Type:  Kawasaki Air Cooling 2 Cycle Engine, 43.2 cc.  
   Max. Output:  1.32 KW (1.8HP)/7,000 rpm    
   Carburetor:  Diaphratgm Carburetor    
   Starting System:  Recoil Starter      
   Fuel:  Mixed Fuel of Gasoline and 2-Stroke Oil (Ratio 25:1)
 Body  Main Shaft:  26 mm dia. 1,200mm. Long Strong Shaft  
   Drive System:  Auto Centrifugal Clutch & Spiral Bevel Gear  
   Blade:  100 Teeth Tipped Saw Blade    
   Operating Lever:  Trigger Lever Type with Slide Stop Switch  
 Dimension  Size:  1,500 x 610 x 465 mm. (L x W x H)  
   Dry Weight:  8.2 kgs.        

 



Tipped Saw Blade Sharpener Model SK-630A

You can sharpen the Tipped Saw Blade with Diamond Disc Grinder by yourself.
(This
device is supplied without Angle Grinder.  It is, therefore, needed to procure the Angle
Grinder locally as input voltage is different by the country used.  The left side photo shows
how the blade is sharpened.  The right side photo is the device actually supplied) 



SPECIFICATION 

Type of Blade to be sharpened:
Tipped-Saw Blade of 9” to 12”
Dimension:
415 x 330 x 160 mm ( L x W x H )
Weight:
5.9 kgs.
Grinder to be mounted:
220 V. Single Phase. 2.5 A. 530 W.
50-60 Hz. No Load speed: 12,000 r.p.m
Grinder Disc used:
Diamond Disc of 100 mm. in dia.
 



Return to PRODUCTS